Albright contactor SW84/2
The SW84 series of contactors has been designed for direct current loads, particularly motors as used on small electric vehicles such as light industrial trucks, powered invalid cars, etc.
They have double breaking main contacts with silver alloy contact tips, which are weld resistant, hard wearing and have excellent conductivity.
They are economical in price and compare favourably with sealed automotive style solenoid switches which cannot be serviced or inspected for contact wear.
Compact Size: The contactors are compact in size and are fully serviceable with a full range of spare parts available.
Installation: Mounting is by means of 4mm tapped holes in the switch frame together with a range of mounting brackets complete with screws and washers.
Operating Coils: Available with 6-240v DC coils, coil connections are by means of 6mm spades of which two are supplied per terminal.
Magnetic Blowouts: Fitting of magnetic blowouts make the polarity sensitive and the positive markings on the top cover of the contactor must be observed. Suffix ‘B’ denotes the fitting of magnetic blowouts.
Auxiliary Contact: Denoted by ‘A’, a double circuit normally open, normally closed microswitch auxiliary contact can be fitted, ratings as shown below.